Table of Contents
Advertisement
Chapter 7
Implementing the VSAM eWay Sample Projects
Configuring the Environment Explorer Properties
Steps required to configure the Environment Explorer properties:
1
From the Environment Explorer tree, right-click the VSAM External System
(esVSAM in this sample), and select Properties. The Properties Editor opens to the
VSAM eWay Environment configuration.
2
Modify the VSAM eWay Environment configuration properties for your system (see
Inbound VSAM eWay Properties
Properties
3
From the Environment Explorer tree, right-click the File External System
(esFileClient in this sample), and select Properties. The Properties Editor opens to
the File eWay Environment configuration.
4
Modify the File eWay Environment configuration properties for your system, as
seen in Table 17, and click OK.
Section
Configuration > Inbound
File eWay > Parameter
Settings
Configuration >
Outbound File eWay >
Parameter Settings
VSAM eWay Adapter User's Guide
on page 26), and click OK.
Table 17 File eWay Environment Properties
Property Name
Directory
Directory
Building and Deploying the prjVSAM_JCD Sample Project
on page 26 and
(Outbound) VSAM CP eWay
Enter the directory that
contains the input files
(trigger files included in the
sample Project).
Trigger files include:
Enter the directory where
output files are written. In this
sample Project, the output
files include:
109
Section 7.6
Required Values
TriggerBpInsert.in.~in
TriggerDelete.in.~in
TriggerPsSelect.in.~in
TriggerTableSelect.in.~in
TriggerUpdate.in.~in
BPEL_Delete_output0.dat
BPEL_Insert_output0.dat
BPEL_PsSelect_output0.dat
BPEL_TableSelect_output0.
dat
BPEL_Update_output0.dat
Sun Microsystems, Inc.
Advertisement
Table of Contents
