Recommended paper
To make copies with a fine image, the following types of paper are recommended.
If you wish to use copy paper other than the recommended types, consult your service technician.
Paper type
Plain paper
TIDAL/Hammermill (20 lb. Bond)
Thick
Laser/Hammermill (24 lb. Bond)
Laser/Hammermill (32 lb. Bond)
Exact Index/WAUSAU (90 lb. Index)
Exact Index/WAUSAU (110 lb. Index)
Tracing Paper
20 lb. Bond tracing paper
Sticker labels
5165/AVERY
PP2500L/3M
*1
OHP Film
X-10.0/Folex
Envelope
Westvaco Columbian CO138
Mailwell No. 553
*1 Only Toshiba-recommended OHP film should be used. Using any other film may cause a malfunction.
Handling and storing paper
Pay attention to the following points:
•
Avoid using paper that is specially treated or previously printed on another machine, and also avoid
performing double copying on the same side of the paper, since this may cause a malfunction.
•
Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or rough paper; this
may cause paper misfeeds.
•
Paper should be wrapped in its wrapping and stored in a damp-free place.
•
To prevent paper from being folded or bent, store it evenly on a flat surface.
Toshiba recommendations / Manufacturer
Mode
PLAIN
THICK1
THICK2
THICK2
THICK3
PLAIN
THICK2
TRANSPARENCY
ENVELOPE
1
47