Table of Contents
Advertisement
10.8
Remote Selection of Fixed Value Output
4 to 20mA output and pulse output can be set to a fixed preset value using a remote signal input.
Proceed as follows to use this function.
Fixed Output Value Setting
DI Setting
• Follow the procedure in 8.4 "Fixed Value Output (Loop Check)" and set the
current output value and pulse output value to be used at the time of fixed output.
Set OFF for fixed output switching.
If the pulse output is not used, it is not necessary to set the pulse output value.
• Follow the procedure in 8.2.14 "Digital I/O Function" to set the Digital Input (DI)
to use it as fixed output mode control signal.
Signal input condition
External signal input
L level input
H level input
4 to 20mA and pulse output
Measured value is output.
Fixed preset value is output.
- 147 -
6F8A0917
Advertisement
Table of Contents
