Operating Instructions; Wash Cycle Selections - Frigidaire 650 Series Use & Care Manual

Operating Instructions

Wash Cycle Selections

Note: Cycle times are approximate and will vary with options selected. Not all cycles available on all models.
Cycle Description
Pots & For pots, pans,
casseroles, and
Pans
dinnerware with dried-
on or baked-on soils.
Heavy For heavily soiled
dishes and silverware.
Wash
Normal For regularly soiled
Wash dishes and silverware.
Light For lightly soiled or
pre-rinsed dishes and
Wash
silverware.
Rinse/ For rinsing dishes that
Hold will be washed later.
Energy Options
Hi-Temp Wash Option
When HI-TEMP WASH ON option is selected,
the dishwasher heats the water in the main
wash to approximately 140°F (60°C). Wash
action will continue but timer will not advance
until proper temperature is reached. The hotter
water provided by this option helps activate
dishwasher detergent to clean food grease
and soil from dishes. HI-TEMP WASH ON
option can be used with any cycle except
RINSE/HOLD.
To turn off option, select HI-TEMP WASH OFF.
Sanitize Option (available select
models)
To sanitize your dishes and glassware, select
the SANITIZE ON option. The water
temperature in the final rinse will be raised to
155°F (68°C) and will maintain that
temperature for 9 minutes. This option is
available in Pots & Pans, Heavy, Normal and
Light cycles. The cycle time will be extended
until the proper water temperature is reached.
(continued)
Cycle Chart
To Select Cycle
• Turn dial to POTS & PANS/HEAVY
WASH.
• Select HI-TEMP WASH ON option.
• Select other desired OPTIONS.
• Turn dial to POTS & PANS/HEAVY
WASH.
• Select desired OPTIONS.
• Turn dial to NORMAL WASH.
• Select desired OPTIONS.
• Turn dial to LIGHT WASH.
• Select desired OPTIONS.
• DO NOT USE detergent.
• Turn dial to RINSE/HOLD.
(Models with SANITIZE option, select
SANITIZE OFF and HEAT DRY OFF.)
5
Water
(approx.)
7.2 gal.
6.0 imp. gal.
27.3 liters
7.2 gal.
6.0 imp. gal.
27.3 liters
6.0 gal.
5.0 imp. gal.
22.7 liters
4.8 gal.
4.0 imp. gal.
18.2 liters
1.2 gal.
1.0 imp. gal.
4.5 liters
Washing action will continue during the water
heating delay. For best results, the incoming
water temperature should be at least
120°F(49°C).
The sanitize criteria may not be satisfied if
there is an interruption of the cycle, power
failure, or if the incoming water temperature is
below 120°F(49°C).
Hi-Temp Rinse Option (available
select models)
When HI-TEMP RINSE ON option is selected,
the dishwasher heats the water in the final
rinse to approximately 140°F (60°C). This will
speed drying and reduce spotting. HI-TEMP
RINSE ON option can be used with any cycle
except RINSE/HOLD.
To turn off option, select HI-TEMP RINSE OFF.
Time* Washes/
(approx.) Rinses
82 min. 2 washes
4 rinses
82 min. 2 washes
4 rinses
76 min. 2 washes
3 rinses
69 min.
1 wash
3 rinses
4-12 min. 1 rinse
* Includes dry time.