Tripp Lite SU6000RT3U Features And Specifications page 4

Front panel LCD Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options;
display LED/LCD panel rotates for viewing in rack/tower formats (see manual)
Alarms Unique audible alarms for all major UPS, environmental and power conditions (see manual)
Alarm cancel Alarm cancel switch
operation
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and
execute scrolling LCD functions; bundled transformer includes bypass switch to enable hot-swap UPS power
module replacement
SURGE / NOISE SUPPRESSION
UPS AC suppression Instantaneous
response time
EMI / RFI AC noise Yes
suppression
ISOLATION
Output isolation 120V output includes load isolation transfomer protection
transformer
PHYSICAL
Installation form 4 post 19 inch rackmount (mounting rail kit included); Tower
factors supported
with included
accessories
Included mounting 3 sets of adjustable 4 post rack rails included
accessory description
Installation form 2 post rackmount (2POSTRMKITHD)
factors supported
with optional
accessories
Optional mounting 3 sets of
accessory notes battery pack
Primary form factor Rackmount
UPS / Power Module 5.2 x 17.5 x 26
dimensions in
primary form factor
(height x width x
depth / inches)
UPS / Power Module 13.3 x 44.4 x 66
dimensions in
primary form factor
(height x width x
depth / cm)
Installed whole 26
system maximum
rack depth (inches)
Installed whole 66
system maximum
rack depth (cm)
Rack Height 9U
Secondary form factor Tower (requires 2-9USTAND)
UPS / Power Module 43.8
weight (lbs)
2POSTRMKITHD required for 2 post rackmount installation of separate power module, transformer and