Specifications (Vtx/Exp Version) - Vertex Standard VX-2200 Series Service Manual

Specifications (VTX/EXP Version)

General
Frequency Ranges:
Number of Groups:
Number of Channels:
Power Supply Voltage:
Channel Spacing:
Current Consumption (Approx.): TX: 11 A (45 W) or 6 A (25 W),
Operating Temperature Range:
Frequency Stability:
RF Input-Output Impedance:
Dimension (W x H x D):
Weight (Approx.):
Receiver
(Measured by TIA/EIA-603-A)
Sensitivity (12 dB SINAD):
Intermediate Frequency:
Adjacent Channel Selectivity:
Intermodulation:
Spurious & Image Rejection:
Audio Output:
Transmitter
(Measured by TIA/EIA-603-A)
Output Power :
Modulation:
Maximum Deviation:
Audio Distortion:
Conducted Spurious Emission:
Specifications subject to change without notice or obligation.
A-1
400 - 470 MHz (Type A)
450 - 512 MHz (VTX, Type D)
450 - 520 MHz (EXP, Type D)
1 groups (VX-2100 Series)
8 groups (VX-2200 Series)
8 channels (VX-2100 Series)
128 channels (VX-2200 Series)
13.6 V ± 15%
12.5 / 25 kHz
RX: 2.5 A,
Standby: 250 mA
–22 °F to +140 °F (–30 °C to +60 °C)
Better than ±2.5 ppm
50 Ω
6.5" x 1.8" x 6.1" inch (165 x 46 x 155 mm) (W/O knob)
2.87 lbs (1.3 kg)
0.25 µV
1st: 67.65 MHz, 2nd: 450 kHz
73 dB (25 kHz)
65 dB (12.5 kHz)
73 dB (25 kHz)
70 dB (12.5 kHz)
80 dB
Internal: 4 W @18 Ω, 5% THD
External: 12 W @4 Ω, 5% THD
45 / 25 / 10 W (50 W)
25 / 12.5 / 5 / 1 W (25 W)
16K0F3E,11K0F3E
±5 kHz (25 kHz)
±2.5 kHz (12.5 kHz)
< 3 % (@1 kHz)
70 dB below carrier