Viking VGIQ554 Use & Care Manual page 15

Cleaning and Maintenance
Infrared Rotisserie Burner
Special care is not required for the infrared rotisserie burner. It is
designed as a self-contained unit. Do not attempt to clean it. Its own
operation burns off any impurities which may condense on it.
Individual part cleaning chart
Part
What to use
Stainless steel* Mild detergent and warm
water or stainless steel
cleaner
Porcelain parts Mild detergent and warm
(Grates) water or nonabrasive
household cleaners.
Briqette Trays Mild detergent and
warm water
Control knobs Mild detergent and
warm water or
nonabrasive household
cleaners. Do not soak.
Painted parts Mild detergent and warm
(Canopy) water or nonabrasive
household cleaners
28
How to clean
Wipe with soft cloth or
sponge. Use stainless steel
cleaner to remove fingerprints
and smudges. Rinse and dry
thoroughly.
Wipe with soft cloth or
sponge. Rinse and dry
thoroughly. For stubborn
spots, occasionally use a
non-caustic oven cleaner
(fume free).
Soak in warm water and mild
detergent. For stubborn
spots, scrub with stainless or
brass bristle BBQ brush. Wipe
down with heavy-duty cloth or
sponge. Dry thoroughly.
Wipe with soft cloth or
sponge. Rinse and dry
thoroughly.
Wipe with soft cloth or
sponge. Rinse and dry
thoroughly.
Cleaning and Maintenance
Battery Replacement (100 Series only)
The grill is equipped with a battery for the electronic ignition.
The battery location is shown on the control panel.
To replace the battery:
1. Slide out drip tray.
2. Locate round black cap, which is inside the burner box
under the battery symbol on the control panel.
3. Unscrew cap. Battery is snapped in the cap.
4. Replace the battery by connecting corresponding post to
post inside burner box.
5. Snap cap on battery and screw back into slot underneath
control panel.
Note:
battery is located underneath
control panel and behind drip tray.
29
Battery Battery Battery
Battery
cap
Round black cap that holds