Whirlpool SF372BEE W/N Service Manual page 20

6. Removing one orifice spud at a time, use a
3
/ " combination wrench, and replace the four
8
color-coded natural gas orifice spuds with the
same color L.P. gas orifice spuds. NOTE:
When you are finished, place the natural gas
orifice spuds in a plastic bag, and store them
in a safe place for possible future use. Also,
keep the literature that was supplied with the
orifice spuds, in the same bag.
orifice spuds
notches
#70 #65
black brass manifold
L.R. L. F.
7,500 BTU 8,500 BTU
7. Reassemble the range.
CONVENTIONAL BURNERS
1. Remove the grates from the burners.
2. Lift the maintop until the support rods lock .
Remove and
replace the
orifice spuds
with the same
color spuds.
gas #65 #68
brass nickel
R. F. R.R.
8,500 BTU 6,500 BTU
3. Remove the four burners from the burner
support bracket and from over the gas valves.
NOTE: If installed, remove the shipping screws
from the burners before you remove them.
4. Removing one orifice spud at a time, use a
3 " combination wrench, and replace the natu-
/
8
ral gas orifice spuds with the L.P. gas orifice
spuds. NOTE: When you are finished, place
the natural gas orifice spuds in a plastic bag,
and store them in a safe place for possible
future use. Also, keep the literature that was
supplied with the orifice spuds, in the same
bag.
orifice spuds
brass brass
L.R. L. F.
9,500 BTU 9,500 BTU
5. Reassemble the range.
1-12
burner shipping
screw
burner
gas valve
Remove and
replace the
orifice spuds.
notches
brass brass
gas manifold
R. F. R.R.
9,500 BTU 9,500 BTU