Setting Surface Controls - Frigidaire Gallery 318068129 Owner's Manual

Sealed burner units tempered-glass surface
Table of Contents

Advertisement

Available languages

Available languages

Setting Surface
Controls
The color of the flame is the key to proper burner adjustment. A good flame is clear,
blue and hardly visible in a well-lighted room. Each cone of flame should be steady
and sharply defined. Adjust or clean burner if flame is yellow-orange. To clean
burner, see instructions under General Cleaning.
Each burner lights automatically from an electric ignitor each time a control knob
is turned to the LITE position.
To operate the surface burner:
1. Place cooking utensil on burner.
2. Push in and turn the Surface Control knob counterclockwise to LITE.
3. Visually check that the burner has lit.
4. After the burner ignites, turn the control knob to the desired flame size. The
knob can now be turned in either direction without being pushed in. The control
knobs do not have to be set at a particular mark. Use the guides and adjust the
flame as needed. DO NOT cook with the control knob in the LITE position, as
this will cause excess wear on the ignitor electrode.
5. To turn the burner off, turn the control knob clockwise as far as it will go, to the
OFF position.
In the event of an electrical power outage, the surface burners can be lit manually.
To light a surface burner, hold a lit match to the burner head, then slowly turn the
surface control knob to LITE. After the burner ignites, turn the control knob to the
desired flame size. Use caution when lighting surface burners manually.
Surface burners in use when an electrical power failure occurs will continue to
operate normally.
Do not operate the burner for an extended period of time
without cookware on the grate. The finish on the grate may chip without
cookware to absorb the heat.
Do not place plastic items such as salt and pepper shakers, spoon holders
or plastic wrappings on top of the cooktop when it is in use. These items could
melt or ignite. Pot holders, towels or wood spoons could catch fire if placed too close
to a flame.
36" Cooktop Burners
On 36" cooktops, the right and left rear burners are specially designed for low
temperature cooking, such as warming foods or simmering sauces. These burners
have a lower heat capacity to help maintain even heat distribution at low
temperatures.
The middle rear burner and the front burners can be used for all types of cooking.
In addition, the front burners have a higher heat capacity for fast, even heat during
high temperature cooking, such as boiling liquids or frying.
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fgc6x9xecdGallery professional series

Table of Contents