Vax V-008T User Guide.qxd
Secure by aligning the three (3) tabs in the base slots.
SLOTS
TABS
Fig.6/8
Replace all three (3) screws to secure nozzle guard (see
Fig.6/9).
Fig.6/9
28/6/07
13:57
Page 11
7. General Maintenance
!
Debris removal - hose:
Check to see if dirt container is full; empty if needed
Plug cleaner in and check to see if there is any suction at
end of hose. If there is suction at end of hose, move on to
debris removal section below. If there is no suction at the
end of the hose, follow these steps:
1
Fig.7/1
Debris removal - nozzle guard:
Remove nozzle guard (Fig.7/2) by removing three (3)
screws. Remove obstruction.
Fig.7/2
Vax Careline
WARNING: To reduce the risk of injury from moving
parts, unplug before servicing.
Remove the dirt container (see section 5) and check
dirt container inlet located on cleaner (Fig.7/1).
general maintenance
0870 606 1248
11