Table of Contents
Advertisement
Attach Hose/Tool Caddy
The hose/tool caddy is designed to be used either on the
cleaner for easy access to the tools and hose, or if the
tools are not going to be used, it can be removed and hung
for storage.
If you do not want to attach the caddy to the cleaner at
this time, proceed to the "Storing Hose and Tools" section
for proper hose placement on the caddy.
Slide tabs (A) on caddy into slots (B) on back of cleaner
(Fig.3/7).
Fig.3/7
Rotate top of caddy toward cleaner handle. Slide caddy
down so notch (A) on caddy rests in hook (B) on cleaner
(Fig.3/8).
A
Fig.3/8
Identify the hose parts before storing hose (Fig.3/9):
A.
Nozzle connector end
B.
Solution tube
Fig.3/9
Storing Hose and Tools
Press hose, a few centimetres from nozzle connector end,
into caddy. Bring hose up and over top of caddy.
Press hose into opposite side of caddy. Loop hose at
bottom of cleaner and press into top of hook.
Loop hose over top of caddy again. Slide hose clip toward
end of hose. Snap tab on hose connector into hose clip.
Repeat on other end of hose.
Press solution tube into opposite side of clip.
Snap stair/upholstery tool onto caddy.
Insert top of hard floor squeegee through "loop" on caddy.
Slide squeegee down into place.
A
B
B
A
B
Fig.3/10
Vax Careline
0870 606 1248
5
assembly
Hide quick links:
Advertisement
Table of Contents
