Vauxhall 2012 Agila Owner's Manual page 110

The tyre repair kit is stowed beneath
the floor carpet in the load
compartment.
1. Screw the compressor air hose to
the connection on the sealant
bottle.
2. Fit the sealant bottle in the
retainer on the compressor.
Set the compressor near the tyre
in such a way that the sealant
bottle is upright.
3. Unscrew valve cap from defective
tyre.
4. Screw tyre inflation hose to valve.
5. The switch on the compressor
must be set to J.
6. Plug the compressor connector
into the accessory socket or the
cigarette lighter socket.
7. Switch on ignition.
To avoid discharging the battery,
we recommend running the
engine.
Vehicle care
8. Set the rocker switch on the
compressor to I. The tyre is filled
with sealant.
9. While the sealant bottle drains
(approx. 30 seconds) the
pressure indicator on the
compressor briefly points to
6 bar. Then the pressure starts to
drop.
All of the sealant is pumped into
the tyre. Then the tyre is inflated.
10. All of the sealant is pumped into
the tyre. Then the tyre is inflated.
11. The prescribed tyre pressure
should be obtained within
109