Vauxhall Vivaro Owner's Manual page 38

34 Seats, interior
Rear seat ac cess 3
To facilitate access to the rear seats, fold
the seat backrest forwards. If necessary
release the two-latch seat belt from its
buckles.
9
Warning
Ensure that the ba ckrest returns to its
correct position a nd the seat belt buc kles
engage securely - see page 39, 40.
Fold ing sea ts 3
On some m od el variants, the load area can
be increased by folding up the rear seats.
Remove the head restraints. Pull the side
ha ndle to release the backrest and fold
forwards onto the seat cushion, if
necessary releasing the two-latch sea t
belts from their buckles.
Release both locking bars at the rear base
of the seat b y pulling back wards.
Lift and fold the seat assembly , until the
seat frame rests in place.
9
Warning
When folding the seat use caution -
beware of moving parts. Ensure the seat
is secure when completely folded.
To return the folding seat to the upright
position, support the seat assembly and
release the bar by pulling the ba r directly
towards you. Gra dua lly lower the seat
assembly , allow ing the rear support legs to
fold down. Lower the sea t completely,
ensuring the rear sup port legs are located ,
and la tc hed. R aise the b ackrest, reinstall
hea d restraints and connect the seat b elts.
9
Warnin g
When installing the seat, ensure that the
seat is properly located on the anchor
points and that the locking catches a re
fully engaged , the b ackrest is returned to
the c orrect position and the sea t belts are
engaged securely.