Vauxhall Vivaro Owner's Manual page 133

Remove cover plate to ac cess battery. Connect the leads in the order shown in the
picture:
1. C onnec t one end of the first jump lead to
the positive terminal 1 of the discha rg ed
battery (id entified by "+" sign on battery
case or terminal),
2. C onnec t the other end of this lead to the
positiv e terminal 2 of the ba ttery
providing the jum p start ("+" sign),
3. C onnec t the first end of the second jump
lead to the negative terminal 3 of the
discharged battery ("-" sign),
4. C onnec t the other end of this jump
lead 4 to g round on the vehicle providing
the jump start, e. g. engine block or screw
connection in engine suspension.
Self-help, vehicle care
9
Warnin g
Care must be ta ken to ensure that the
leads do not inadv ertently contact metal
surfaces within the engine com partment.
z Do not c onnect the lead to the negative
terminal of the battery on the vehic le
providing the jump start! The c onnec tion
point should be as far away from the
battery as possible.
z Route the leads so tha t they cannot
catch on rotating parts in the engine
compartment.
z Reverse abov e seq uence exac tly when
removing leads.
129