Vauxhall TIGRA Owner's Manual page 147

7. Screw in wheel bolts and tighten slig htly,
inserting the wheel bolt wrench 3 as far
as possible.
8. Lower vehicle.
9. Tighten wheel bolts crossw ise, putting on
wheel bolt wrench 3 as fa r as possible.
10. Before refitting the w heel trim, clean the
wheel around the retaining clips. Valv e
sym bol 3 on back of wheel trim must
point towards va lv e on wheel.
Position and engage wheel trim.
Alloy wheels 3 : Align and refit w heel
bolt c aps 3.
Self-help, vehicle care
11. Stow the rep la ced wheel - see pag e 138.
Put away the tools and warning triangle
- see pages 137, 139.
12. Check the pressure of the new ly fitted
wheel. Adjust as necessary.
13. Have the tightening torque of the wheel
bolts on the new wheel checked on the
vehicle using a torque wrench as soon
as possib le and , if necessary, corrected.
Tightening torque – see page 170.
14. Replace the faulty tyre on the wheel
that was rem oved.
15. Replace temporary spare wheel 3 with
a full spec ification wheel w ithout delay .
143