Roof Anchor Type P (Pantile) - Vaillant auroTHERM VFK 145 H/V Installation Manual

Hide thumbs Also See for auroTHERM VFK 145 H/V:

Table of Contents

6.2.1

Roof anchor type P (pantile)

Fig. 6.3 Roof anchor type P

The roof anchor type P can be fixed to the rafters

(Pos. A) or to the roof batten (Pos. B).

Fixing to rafters

Fig. 6.4 Fixing to rafters

1. Uncover the rafters where needed. For distances

please see Tab. 6.2 and 6.3.

2. Position the roof anchor.

3. Loosen the upper bolt with the socket/combination

wrench (SW 13) until the height of the roof anchor can

be adjusted.

4. Position the roof anchor at the same height of the

pantiles, so that the upper part of the anchor is on the

roofing, and tighten the bolt with the socket/combina-

tion wrench (SW 13).

Installation manual auroTHERM 0020057143_02

5. Screw the roof anchor to the rafters with the 3 sup-

plied bolts.

6. Slide the pantiles back to the original position.

If necessary, adapt the water gutter on the lower (A)

or upper side (B) of the pantile with a hammer, until

the pantiles are tight.

On-roof mounting 6

Table of Contents