Vaillant auroTHERM VFK 145 H/V Installation Manual page 23

4 Installation
1
Fig. 4.35 Ridge plate coupling
Fig. 4.36 Rivetting the frame
Fig. 4.37 Covering the profile ends
Fig. 4.38 Covering the profile ends
22
2
1
With roof angles of 22-75°
• Fix the ridge plates to the roof battens
with the bolts no. 1 using the supplied Torx
bit.
• Fix the ridge plate coupling (1) to the ridge
plate joint with three bolts no. 5 using the
supplied Torx bit.
• Drill respectively right and left a hole (di-
ameter 4.5 mm) on the marks laterally
through the ridge plate (1).
• Rivet the ridge plate with the side sec-
tion (2).
• Place the tile bars on the ridge plates.
• Bend the metal bands and hook the tile
bars to the roof batten from the top.
• Cover the side profile ends and the collec-
tor joints with the profile ends from the
bottom.
• For this purpose fit the profile ends from
the bottom and then tilt them up, until
they lock in the upper collector edge.
Installation manual auroTHERM 0020057148_03