Random Playback; Rapid Playback; Useful Function; Noise Reduction - Toshiba BDX2000KB Owner's Manual

E5RJ0BD_EN.book Page 22 Tuesday, October 20, 2009 3:53 PM

Random Playback

This function shuffles the playback order of tracks / files.
1
In stop mode, press [MODE] twice.
e.g.) audio CD
1 2 3
- - / 16
Random
CD-DA
0:36
1
1:14
2
0:45
3
0:50
4
0:53
5
0:20
6
0:54
7
Page Down
1. Audio CD
Track information
MP3 / WMA / JPEG
File information
2. Audio CD
"CD-DA" will be displayed
MP3 / WMA / JPEG
Current disc, SD card, or folder name will be displayed
3. Track / File list
Track / File list in the original order will be displayed
4. Operation guide
Press [Red] to go to the previous page in the track /
file list
Press [Green] to go to the next page in the track / file
list
5. Total playback time of all tracks (audio CD only)
6. Playback status
2
Press [PLAY B] to start random playback.
To exit from the random playback mode:
• Press [MODE] in stop mode.
Note
• During the random playback, press [STOP C] once to
set the resume point, and then press [PLAY B] to
resume random playback from where [STOP C] was
pressed (audio CD) or from beginning of the file
where [STOP C] was pressed (MP3 / WMA / JPEG).
• To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
" Track" appears during playback. To repeat the
entire random selection press [REPEAT] repeatedly
until " All" appears during playback.
• Playback from a desired track / file is not available
during random playback.
• In stop mode, press [RETURN] to switch to the
programme playback mode.
• For a disc containing mixed MP3 and Windows
Media™ Audio files, random playback of those files
will be performed.
22
PLAYBACK
4 5 6
Total 1 : 13 : 29

Rapid Playback

This function plays back approximately at 1.3 times the
normal playback while keeping the sound output. This
function is available only on discs recorded in the Dolby
Digital format.
1
During playback, press [MODE] repeatedly
until appears.
2
Press [ENTER] or [s / B] to change the setting.
"Off" : Plays back in normal speed.
" : Plays back approximately at 1.3 times of normal
"
playback.
3
Press [PLAY B] to return to normal playback.
Note
• Picture adjustment and audio language setting
cannot be changed during this function.
• Virtual surround does not work during this function.
• This function may not work at some points on a disc.
• During this function, 2ch LPCM will be output from
HDMI OUT jack and DIGITAL OUT jack.

Useful Function

Noise Reduction

Reduces the noise of the playback picture.
1
During playback, press [MODE] repeatedly
until appears.
2
Use [s / B] to change the setting.
"Off" : Shows the original picture as recorded.
"1" : Executes 3D noise reduction which detects and
deletes the noise by comparing each picture
frames.
"2" : Executes MPEG noise reduction which reduces
the block noise and mosquito noise on the
subtitles on the movie.
"3" : Executes both MPEG noise reduction and 3D
noise reduction.
3
Press [RETURN] to exit.
Note
• The setting will remain the same even if the unit is
turned to the standby mode.
• You cannot adjust the setting during rapid playback.
EN