Hardware and Wireless Utility Installation
Follow the instructions below to install the PCI Card and Wireless Utility.
Windows Vista
1.
Insert the Utility and Driver CD-ROM into your computer's CD-ROM Drive.
2.
Turn off your computer‚ unplug the power cord and remove the computer's cover.
3.
Pick a free PCI expansion slot and remover the protective bracket. Insert the Card into the slot until
it is fully seated.
4.
Secure the Card bracket with the screw from step 2. Replace the computer's cover.
5.
Connect the external antenna to the Card from the SMA connector. And then, reconnect the power
cord and power on the computer.
6.
Click Locate and install driver software (recommended).
7.
Click Don't Search Online.
14