Table of Contents
Advertisement
Loading Envelopes
(A) Rear side
(B) Address side
Open the Paper Support.
(1)
Open the Paper Output Tray gently, and open the Output Tray Extension.
(2)
Slide the Paper Guides to open them, and load the envelopes in the center of the
(3)
Rear Tray WITH THE ADDRESS SIDE FACING YOU.
The folded flap of the envelope will be faced down on the left side.
Up to 10 envelopes can be loaded at once.
Slide the Paper Guides to align them with both sides of the envelopes.
(4)
Do not slide the Paper Guides too hard. The envelopes may not be fed properly.
3.
Specify the settings in the printer driver.
Select Envelope in Media Type.
(1)
Select the size for envelopes.
(2)
Select DL Env. or Comm. Env. #10 in Page Size.
Select DL Envelope or #10 Envelope in Paper Size.
Select Landscape in Orientation.
(3)
Important
If you do not specify Page Size (or Paper Size) or Orientation properly, the address will be
printed upside down or will be turned to 90 degrees.
Note
The machine may make operating noise when feeding envelopes.
In Windows, if the print result is upside down, select Rotate 180 degrees on the Page Setup
sheet in the printer properties dialog box of the printer driver.
Page 62 of 628 pages
Page top
Advertisement
Table of Contents
