Canon CanoScan 5200 F Quick Start Manual page 15

8
Select the [Output Size].
You can select from the following options.
• If you selected [Print (300 dpi)] in Step 7:
Flexible / 4"x6" / A4 / Letter / Add/Delete
• If you selected [Image display (150 dpi)] in Step 7:
Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 /
2048 x 1536 / Add/Delete
[Flexible] is selected in this example.
The Flexible option scans at an enlarged size equivalent to the
4" x 6" size.
Selecting an option other than [Flexible] in the [Image Display
(150 dpi)] category allows you to select the output size in
pixels.
You can scan film at the correct dimensions for computer
displays (screen area) and digital cameras.
9
Click [Scan].
The final scan will start.
When the scan is complete, click the ScanGear CS
(Windows) or
The scanned image will appear in ArcSoft PhotoStudio.
10
Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPEG format is recommended) and click
[Save].
11
Click close box
PhotoStudio window to close it.
• If the scanner does not perform as described above, read the "Troubleshooting"
section of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the
User's Guide (PDF format manual) for each software program on the CanoScan Setup
Utility CD-ROM.
(Macintosh)
.
(Windows) or (Macintosh) in the
close box
Scanning Film
15