Technical Specifications; Troubleshooting - Cambridge Audio AZUR 351C User Manual

Technical specifications

D/A converters
Filter
Frequency response(+/-0.2dB) 20Hz to 20kHz
THD @ 1Khz 0dBFs
IMD (19/20kHz) 0dBFs
Linearity @ -90dBFs
Stop-band rejection (>24kHz) > 90dB
S/N ratio, A weighted
Total correlated jitter
Crosstalk @1kHz
Crosstalk @20kHz
Output impedance
Maximum power consumption 25W
Standby power consumption
Dimensions - H x W x D
Weight
10
Wolfson Microelectronics WM8728
24-bit /192kHz capable
2-Pole Sallen-Key Butterworth fillter
< 0.003%
< 0.001%
+/- 0.5dB
> 99dB
<250pS
<-90dB
<-80dB
<50ohms
<1W
85 x 430 x 305 mm
(3.4 x 16.9 x 12.2")
4.8kg (10.6lbs)

Troubleshooting

There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check the unit is switched on at the rear panel.
Check fuse in the mains plug or adaptor.
The player will not read the disc
Check the disc is not loaded upside down.
Check that the disc is not too scratched or dirty.
There is no sound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
The disc is skipping
Check that the disc is not too scratched or dirty.
Ensure the player is on a firm surface and not subject to vibrations.
There is a hum coming from the speaker
Ensure that all cable connections are secure.
The remote handset will not function
Check that the batteries have not expired.
Ensure that nothing is blocking the remote sensor.
In the event that the above solutions do not remedy your problem, please
consult our frequently asked questions (FAQ) section on our website:
www.cambridge-audio.com/sts/faqs
You can also use this facility to post a question to our Technical Support
team.
For all servicing, in or out of warranty, please contact your dealer.