Dismounting The Coupling Ball Bar; Replace Protective Cap Onto Coupling Ball Bar - Vauxhall Corsa & Combo Owner's Manual

Dismounting the coupling b all ba r
Press red b utton and p ull p rotective cap
off.
Get hold of the top and bottom of the
retaining slider 1, pull bac k as far as
possible a nd hold. Push the release lever 2
to the left and pull the coupling ball ba r out
of the opening.
Replace protective cap onto coupling ball
bar:
z Get hold of top and bottom of retaining
slider 1 and pull back ward (relea se lever
2 jump s to the right),
z replace protectiv e ca p.
Insert lock into opening for coupling b all
bar: put cap on a t bottom first, then push
in from top.
Do not use steam -jet cleaners or other
high-pressure clea ners to clean the
coupling ball b ar.
St owage of coup ling ba ll bar
Place the coupling ba ll bar in the b ag as
show n on p age 166 in Fig. 11755 S and
attach next to the vehicle tools beneath the
spare wheel.
169