Drive Systems; All-Wheel Drive - Cadillac Escalade ESV Owner's Manual

9-34 Driving and Operating
Also see Tow/Haul Mode under
more information.
The Tow/Haul Mode works with the
®
Autoride feature, if the vehicle has
this, to enhance the ride when
trailering or with a loaded vehicle.
See
.
Grade Braking
The Grade Braking shift modes can
be activated by pressing the button
on the end of the shift control lever.
While in Range Selection Mode,
Grade Braking is deactivated
allowing the driver to select a
desired range of gears.
Grade Braking is only active while
the Tow/Haul Mode is selected and
you are not in the Range Selection
Mode. See Tow/Haul Mode listed
previously and
for for more information on
the Range Selection Mode. Grade
Braking assists in maintaining
desired vehicle speeds when driving
on downhill grades by automatically
implementing a shift schedule that
utilizes the engine and transmission
to slow the vehicle. This reduces
wear on the braking system and
increases control of the vehicle.
Grade Braking monitors vehicle
speed, acceleration, engine torque
and brake pedal usage. Using this
information, it detects when the
vehicle is on a downhill grade and
the driver desires to slow the vehicle
by pressing the brake.
Also see
for more information.

Drive Systems

All-Wheel Drive

If the vehicle has this feature,
engine power is sent to all four
wheels when extra traction is
needed. This is like four-wheel
drive, but there is no separate lever
or switch to engage or disengage
the front axle. It is fully automatic,
and adjusts itself as needed for road
conditions.
If the vehicle is a hybrid, see
Four-Wheel Drive in the hybrid
supplement.