Brother RJ-4030 Software Manual page 25

(3) Media width and length
The media width and length is described in millimeters. 0～255 (0 to FFh)
(a) Continuous length tape
* Media Width: The tape width is indicated in millimeters.
* Media Length: Fixed at 00h
Media
102 mm
(b) Die-cut labels
* Media Width: The width of the die-cut section is indicated.
* Media Length: The length of the die-cut section is indicated.
Media
102 mm x 26 mm
102 mm x 50 mm
102 mm x 76 mm
102 mm x 102 mm
102 mm x 152 mm
(4) Media type
Media Type
No media
Continuous length tape
Die-cut labels
(5) Status type
Status Type
Reply to status request
Printing completed
Error occurred
Turned off
Notification
Phase change
(Not used)
(Reserved)
If an error occurred during printing, the printer returns the error status.
Media Width
102
Media Width
102
102
102
102
102
Value
00h
4Ah
4Bh
Value
00h
01h
02h
04h
05h
06h
08h to 20h
21h to FFh
- 21 -
Raster Command Reference
Media Length
00
Media Length
26
50
76
102
152
Description
Used as print information when the
media type is not indicated.
Used for both paper and film.
Used for both paper and film.
Description
4. Printing Command Details