Configuring Your Network Using Wi-Fi Direct (For Hl-3170Cdw); One Push Configuration Using Wi-Fi Direct - Brother Wi-Fi Direct Manual

Configuration methods
Configuring your network using Wi-Fi Direct
(For HL-3170CDW)
The Wi-Fi Direct network settings are configured from the control panel of the machine.

One push configuration using Wi-Fi Direct

If your mobile device supports Wi-Fi Direct, you can configure a Wi-Fi Direct network by following these
instructions.
a
Press a or b to choose Network.
Press OK.
b
Press a or b to choose Wi-Fi Direct.
Press OK.
c
Press a or b to choose Push Button.
Press OK.
d
When Wi-Fi Direct On? is displayed, press a to accept.
To cancel, press b.
e
Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
Activate Wi-Fi Direct on other device and press OK. is displayed.
Press OK on your machine. This will start the Wi-Fi Direct setup.
To cancel, press Back.
f
Do one of the following:
 When your Brother machine is the G/O (Group Owner), connect your mobile device to the machine
directly.
 When your Brother machine is not the G/O (Group Owner), it will display available device names with
which to configure a Wi-Fi Direct network. Press a or b to choose the mobile device you want to
connect to and press OK. You can re-search for available devices by pressing a or b to display
Rescan and press OK.
g
If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device,
you can download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the
Brother Solutions Center (http://solutions.brother.com/).
If the connection failed, see Troubleshooting on page 16.
2
2
2
6