Braun 150 User Manual page 7

• If you regularly clean the shaver
under water, then once a week apply
a drop of light machine oil onto the
long hair trimmer (4) and shaver foil.
Alternatively, you may clean the shaver
using the brush provided (B):
• Switch off the shaver. Remove the
shaver foil and tap it out on a flat
surface.
• Using the brush, clean the cutter
block and the inner area of the
shaver head. However, do not clean
the shaver foil with the brush as this
will damage the foil.
Keeping your shaver in top
shape
Replacing the shaver foil and cutter
block
To maintain 100% shaving perform-
ance, replace the shaver foil (2)
and cutter block (3) at least every
18 months or when worn. Change both
parts at the same time for a closer
shave with less skin irritation.
(Shaver foil and cutter block: key part
no. 11B)
Environmental notice
This appliance contains
rechargeable batteries.
To protect the environment,
do not dispose of the appliance in
the household waste at the end of its
useful life. Disposal can take place at
a Braun Service Center or appropriate
collection sites.
Subject to change without notice.
For electric specifications, see printing
on the special cord set.
7