Loudspeaker Grilles; Removing Installed Loudspeakers - Bose FreeSpace 8 Installer's Manual

4.0 Installation
4.4

Loudspeaker grilles

1. Pull down on the tab to remove the paint shield (Figure 23).
2. Push up on the grille until it is flush with the loudspeaker rim (Figure 24).
Note: If the ceiling tile lifts up as the
grille is installed, pull the loudspeaker
down slightly. Hold the loudspeaker rim
firmly with your fingers while pushing up
on the grille with your thumbs.
Note: It is not necessary to orient the
®
Bose logo before installing the grille.
The logo can be turned in any direction
after installation.
4.5 Removing installed
loudspeakers
If the loudspeaker needs to be removed
after installation, first return the springs
to their locked position. If possible, pull
the loudspeaker down and rehook the
springs in the locked position. Then lift
the loudspeaker off the springs and
remove.
If the springs cannot be rehooked,
release them completely. Holding a
spring by its hook, carefully release as
much tension as possible. Then release
the spring.
Repeat for the second spring.
16
AM177915_03_V.pdf • May 6, 2002
Figure 23
Figure 24