Bose FreeSpace 3 Installer's Manual
Hide thumbs Also See for FreeSpace 3:

Advertisement

®
®
Bose
FreeSpace
3 Loudspeaker System
Installer's Guide

Advertisement

Table of Contents
loading

Summary of Contents for Bose FreeSpace 3

  • Page 1 ® ® Bose FreeSpace 3 Loudspeaker System Installer’s Guide...
  • Page 2: Safety Reminders

    In accordance with EMC Directive 89/336/EEC and Article 10(1) of the Directive, is in compliance with the following norm(s) or document(s): Technical regulations: EN50081-1, EN50082-1 Accredited by: Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA 15 April 2000 Bose Products B.V. Nic Merks...
  • Page 3: Components View

    Installation 1.0 Package contents 1.1 FreeSpace 3 Acoustimass module carton ® ® (1) Rear connections cover (1) Acoustimass module with partial bracket attached (1) Wall-mount bracket section 1.2 FreeSpace 3 satellite speaker carton (2) Wall-mount brackets (2) Satellite speakers...
  • Page 4: Amplifier Output Connection

    Refer to installation manual PN254410 for proper installation STEREO CH 2 and operation instructions INPUT MONO STEREO USE JUMPERS CH 1 FreeSpace 3 ® Acoustimass Module Press to open • Connecting an amplifier Press to each wi each wire clamp output to daisy-chained...
  • Page 5: Transformer Tap Setting Or Bypass

    INPUT Connection jumpers MONO STEREO USE JUMPERS CH 1 as factory installed ® FreeSpace 3 Acoustimass Module 2.3 Direct (transformer bypass) use • Connecting a mono source with the transformer bypassed Note: Jumpers required TRANSFORMER SETTINGS for 70V/100V operation. For transformer bypass,...
  • Page 6: Satellite Speaker Connection

    INPUT MONO STEREO USE JUMPERS CH 1 ® FreeSpace 3 Acoustimass Module 2.4 Satellite speaker connection With or without use of the transformer, there are 3 options for connecting the satellite speakers to the module: • Using 2 satellite speakers...
  • Page 7: Using Other Compatible Speakers

    Channel 1 in Stereo MONO STEREO USE JUMPERS CH 1 FreeSpace 3 ® Acoustimass Module 2.4.1 Using other compatible Bose speakers ® ® ® ® You can use the FreeSpace Acoustimass module with other Bose speakers, such as the FreeSpace Model 8, Model 32, Model 32SE or FreeSpace 6 speakers.
  • Page 8 Installation 2.5 Mounting and wiring satellite speakers Choose a position and mounting method consistent with local building codes and regulations. Use four screws per bracket. 2.5.1 2.5.2 2.5.3 2.5.4 2.5.5 2.5.6 2.5.7 2.5.8...
  • Page 9 Installation 2.5.9 2.5.10 2.5.11 2.6 Mounting and wiring the module Choose a mounting position, method, and hardware consistent with local building codes and regulations. Use at least three mounting screws. 2.6.1...
  • Page 10 SAT 2 SAT 3 SATELLITE CONNECTIONS SAT 2 70V/100V MONO INPUT___ SAT 1 SAT 1 Refer to installation PN254410 for proper manual and operation instructions installation STEREO CH 2 INPUT USE JUMPERS MONO STEREO CH 1 FreeSpace 3 ® Acoustimass Module...
  • Page 11: Specifications

    Specifications Loudspeaker specifications System: Satellite: Module: Frequency Range Frequency Range Frequency Range 50Hz to 16kHz ( 3dB) 210Hz to 16kHz ( 3dB) 50Hz to 210kHz ( 3dB) System Configurations Sensitivity Sensitivity 70V/100V (12W, 25W, 50W, 84dB-SPL @ 1W, 1m 76dB-SPL @ 1W, 1m 100W taps) monaural (pink noise) (pink noise) per channel...
  • Page 12 Bose’s maximum liability shall not exceed the actual purchase price paid by you for the product. In no event shall Bose be liable for special, incidental, consequential or indirect damages. This warranty does not cover a defect that has resulted from improper or unreasonable use or maintenance, accident, improper packing, or unauthorized tampering, alteration or modification as determined solely by us.
  • Page 14 ©2000 Bose Corporation The Mountain Framingham, MA 01701-9168 USA English...

Table of Contents