Related Manuals for Bose FreeSpace 32SE
Summary of Contents for Bose FreeSpace 32SE
- Page 1 ® ® Bose FreeSpace Model 32SE Surface-Mount Environmental Loudspeakers Installer’s Guide...
-
Page 2: Safety Information
In accordance with EMC Directive 89/336/EEC and Article 10(1)of the Directive, is in compliance with the following norm(s) or document(s): Technical regulations: EN50081-1, EN50082-1 Accredited by: Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA 15 April 2000 Bose Products B.V. Nic Merks... -
Page 3: Installation
Installation 1.0 Package contents Supplied with 70V and 100V Model 32SE loudspeakers only. 2.0 Steps for loudspeaker installation For 70V and 100V versions of the Model 32SE loudspeakers, remove the rear cover. 2.1 Changing the tap on 70V and 100V versions Both the 70V and 100V versions are set at the factory to the maxi- mum of 32W. -
Page 4: Connecting The Wires
Installation 2.2 Connecting the wires This process varies according to the version of loudspeaker you are using. 2.2.1 To the 4 ohm version Caution: Install the 4 ohm Model 32SE loudspeaker in compliance with local building and electrical codes. In the U.S., this version is designed for installation using Class 2 wiring methods in accordance with Articles 640 and 725 of NFPA 70, National Electrical Code. - Page 5 Installation Optional use of quick-connect terminals on 70V and 100V versions Reattach the cover to protect wire termination. Dress the wires carefully to prevent the cover from pinching them. Alternative wire treatment • Simple wiring • Daisy chaining • Sealed rear housing* •...
-
Page 6: Mounting The Bracket
Installation 2.3 Mounting the bracket Choose a position and mounting method consistent with local building codes and regulations. Use two screws per bracket. • Wall-mount option • Ceiling-mount • Mounting footprint option 6.9" (175.2 mm) " " 2.4 Attaching and adjusting the speaker Partially insert the screws into the speaker. -
Page 7: Specifications
Specifications Loudspeaker specifications Frequency Range 90Hz to 16kHz ( 3 dB) Model 32SE Versions Active Equalization • 70V (1W, 2W, 4W, 8W, 16W, 32W taps) • 100V (1W, 2W, 4W, 8W, 16W, 32W taps) Passive Equalization • 4 , 32W, no transformer Sensitivity Active Equalization 86dB-SPL @ 1W, 1m (pink noise) -
Page 8: Warranty
Bose Service Agency, or Return product personally with proof of purchase from an authorized Bose dealer directly to the Bose organization in your country. If you elect to return the product directly to a Bose organization, Contact the Bose organization in your country for specific return and shipping instructions;... - Page 10 ©2000 Bose Corporation The Mountain Framingham, MA 01701-9168 USA English...