Before you begin Your 201 and direct sound energy for an open, spacious performance. They are designed by Bose bring you high-quality listening pleasure. These speakers are significantly different from conventional speakers, so be sure to read this owner’s guide. It will help you set up and use your speakers properly, for the greatest enjoy- ment.
flat surface, 1” back from the center of the curved front panel. Do not use these speakers in a moving vehicle. To mount the speakers on a wall, use only the Bose WB-3 wall mounting bracket. Please follow the mounting instructions that come with these brackets.
18 (0.82 mm 16 (1.3 mm 14 (2.1 mm Note: Before running the speaker cord through a wall or under a floor, check your local build- ing code requirements and safety regulations. If necessary, contact an electrical installer for this information.
Setting Up Make the connections Just press the terminal tab on the back of each speaker to insert the appropriate wire (Figure 3). CAUTION: Before making any connections, turn off your receiver and unplug it from the AC power (mains) outlet. Not doing so may result in damage to your system.
Also, do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. The speaker grille panels require no special care. You may vacuum them carefully to remove dust.
Warranty period Bose 201 warranty. Details of the coverage are provided on the warranty card that came with your speakers. Please fill out the information section on your card, detach, and mail to Bose. ® ® and 301 series V Direct/Reflecting...
: One 8-inch (20 cm) woofer. Two 2-inch (5 cm) high-sensitivity tweeters. Compatibility/impedance 201: Compatible with amplifiers and receivers rated from 10 to 120 watts per channel. Rated 8 ohms 301: Compatible with amplifiers and receivers rated from 10 to 150 watts per channel.