General Power Tool Safety Warnings Read all safety warnings and all instructions. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE Work area safety power tool. Do not use a power tool while you are tired or under the influence of drugs, Keep work area clean and well lit.
Page 3
Disconnect the plug from the power source Keep cutting tools sharp and clean. and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the power tool, accessories and tool bits etc. in accordance with these instructions, Store idle power tools out of the reach of taking into account the working conditions children and do not allow persons unfamiliar...
container before beginning work, frequently during work, after completion of work, and before storing the tool. Do not throw dust on an open fire. Never use dull or damaged bits. Sharp bits must be handled with care. When performing sanding and surface preparation operations with tool connected to a dust collection and extraction system be aware of the materials creating the dust.
Page 5
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:...
Page 6
Symbols IMPORTANT: Symbol Name Designation/Explanation...
Functional Description and Specifications Disconnect the plug from the power source before making any assembly, adjustments or changing accessories Spiral Saw The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. NOTE:...
Assembly Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. REMOVING, INSTALLING, AND ADJUSTING THE DEPTH GUIDE CHANGING THE COLLET The bit flutes are sharp and should be handled with caution. INSTALLING BITS To prevent damage to tool, never use the shaft lock as a braking devise to stop the tool from rotating.
Operating Instructions BUMP SWITCH (ON/OFF) TO TURN THE TOOL “ON” TO TURN THE TOOL “OFF” Hold the tool with both hands while starting, since torque from the motor can cause the tool to twist. MAKE A FEW PRACTICE CUTS NOTE: Step 1: Step 2: Step 3:...
Page 11
INSTRUCTIONS FOR CREATING CUT-OUTS IN DRYWALL FOR OUTLETS, CAN LIGHTS, WINDOWS, AND DOORS Step 4 Step 5 Do not attempt to use this Step 6 tool to make cut-outs around any fixture or opening which has live electrical wires, or on any wall which Step 7 may have live electrical wiring behind it, as the bit could conduct current to the tool,...
Page 12
Functional Description and Specifications Disconnect the plug from the power source before making any assembly, adjustments or changing accessories Optional Circle Cutter Attachment NOT INCLUDED WITH ALL KITS ATTACHING CIRCLE CUTTER Dust Extraction Kit NOT INCLUDED WITH ALL KITS ATTACHING DUST SHIELD BELT CLIP...
Maintenance Service Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. Cleaning To avoid accidents always disconnect the tool from the power supply before cleaning or performing any maintenance. TOOL LUBRICATION Always wear safety goggles when cleaning tools with compressed air.