Advertisement
Quick Links
043
WELLS BLOOMFIELD, LLC
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 775-689-5703
fax: 775-689-5976
www.wellsbloomfield.com
OPERATION MANUAL
MODEL
HDW-Series
HUMIDIFIED
DRAWER
WARMERS
Includes
INSTALLATION
USE & CARE
Model HDW-2
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
PRINTED IN UNITED STATES OF AMERICA
305986
07
p/n
Rev. D ECN-13371
M043
1025 cps
Advertisement
Related Manuals for Wells HDW-Series
Summary of Contents for Wells HDW-Series
- Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
- Page 2 (775) 689-5707 or fax (775) 689-5976 if service is performed by unauthorized personnel. The prices charged by Wells Bloomfield for its products are for information and other details concerning warranty. SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS Resetting of safety thermostats, circuit breakers, over cleaning schedules, are customer responsibility.
- Page 3 PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Bloomfield appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.
- Page 4 FEATURES & OPERATING CONTROLS NOTE: HDW-2 DUAL-DRAWER STANDARD WIDTH UNIT SHOWN. SINGLE-DRAWER AND NARROW WIDTH UNITS ARE SIMILAR...
- Page 5 Call your Authorized Wells Service Agent for service. CAUTION: The technical content of this manual, including any wiring diagrams, HOT SURFACE schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.
- Page 6 INSTALLATION NOTE: DO NOT discard UNPACKING & INSPECTION the carton or other packing Carefully remove the appliance from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for Appliance before connecting electrical power or otherwise performing hidden damage and tested it any installation procedure.
- Page 7 INSTALLATION (continued) ELECTRICAL WARNING: ELECTRIC Refer to electrical specifications on page 1. Circuit must meet or exceed the amperage and wattage requirements listed. SHOCK HAZARD All servicing requiring 120 Volt units require a properly grounded NEMA 5-15R receptacle: access to non-insulated elec- trical components must be performed by a factory au- thorized...
- Page 8 OPERATION INSTALL WATER PAN CAUTION: HOT SURFACE IMOPORTANT: The water pan must be installed with care in order to prevent damage to water heating element. Exposed surfaces can be hot to the touch and may cause burns. CAUTION: ELECTRICAL SHOCK HAZARD DO NOT splash or pour water onto control panel or wiring.
- Page 9 OPERATION (continued) NORMAL OPERATION CAUTION: Plug unit into an appropriate electrical receptacle. HOT SURFACE Add water to water pan. Proper water level is 1/2" from top. Exposed surfaces can be hot OPERATIONAL TIPS: to the touch and may cause Refill water pan as required during operation. burns.
- Page 10 OPERATION (continued) EXAMPLE: PROGRAM MODE Set Menu #3 AIR temp = 150ºF WATER temp = OFF TIME setting = 2hr 30min Press and hold MENU key, then UP ARROW key or DOWN ARROW key to select menu number. Release keys. Press and hold MENU key for 3 seconds to enter programming mode.
- Page 11 OPERATION (continued) RECOMMENDED TEMPERATURE SETTINGS AND HOLDING TIMES TEMPERATURE ºF TYPE OF FOOD TIME (HRS) WATER BREAD PRODUCTS 2 1/2 DAIRY & EGG PROD- UCTS MEATS & POULTRY ROASTED MEATS & POULTRY FRIED SEAFOODS 2 1/2 WITH SAUCE SEAFOODS 1 1/2 FRIED STARCHES BEANS...
- Page 12 CLEANING INSTRUCTIONS PRECAUTIONS: Disconnect appliance from electric power. CAUTION: Allow unit to cool before proceeding. ELECTRIC SHOCK HAZARD FREQUENCY: Minimum -Daily Disconnect appliance from electric power before cleaning. TOOLS: Mild Detergent Clean cloth or sponge CAUTION: HOT SURFACE 1. Disconnect warmer from electric power. Allow to cool before cleaning.
- Page 13 PARTS & SERVICE ACCESSORY PART NO. IMPORTANT: Use only factory authorized service parts and replacement PRODUCT PAN, all HDW-Series Warmer 22228 filters. For factory authorized service, or to order factory authorized replacement parts, contact your Wells authorized service agency, or call:...
- Page 14 Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P.