Table of Contents
Advertisement
➜ Locate a suitable place for install-
ing the Lucca.
To ensure a perfect hold, the glass
must be free of dust and oil. If nec-
essary, clean the glass fi rst using
the supplied lens cleaning tissue.
➜ Press the suction plate of the sup-
port against the glass.
➜ Push the lever on the suction sup-
port towards the glass.
➜ The holder can now be adjusted.
The track for mounting the Lucca
must be aligned vertically.
Removing the Support
If you change vehicles, you can simply
remove the support.
➜ Push the lever on the suction sup-
port away from the glass.
➜ Carefully loosen the suction plate
at the edge from the glass so that
air can enter between suction cup
and glass.
➜ Carefully pull the suction cup off
of the glass.
Installation in the Vehicle
Attaching Lucca
The Lucca features a mount for the
track of the suction cup holder.
➜ Carefully push the guide of the
Lucca over the track of the suction
cup holder.
Attaching the Cradle (optional)
The cradle features a mount for the
track of the suction cup holder on
the rear side. The cradle expands the
functions of the Lucca and is part of
the Lucca MP3 scope of delivery. The
last pages of these instructions pro-
vide information about connecting
the cradle to your car sound system.
15
Advertisement
Table of Contents
