Table of Contents
Advertisement
Adjusting the volume for traffic
announcements and the beep
tone
This volume was preset at the factory,
though you can alter the value using the
DSC function (see "DSC programming, TA
VOL").
If the volume level is altered while a mes-
sage is played, this will only affect the cur-
rent announcement.
Tape operation
The car stereo has to be switched on.
The unit will automatically switch to tape
operation when inserting a cassette.
Inserting a tape
•
Turn on the set.
•
Insert a tape.
Track A or 1 will be played.
During tape operation, "TR 1" or "TR 2"
(track) will appear in the display.
Insert the tape with side A or 1 facing up, the
open side showing to the right.
Ejecting a tape
•
Press
.
The cassette will eject.
Fast winding
Fast forward
•
Press FF (fast forward).
At the end of the tape the unit will au-
tomatically reverse the direction and
start playing the other side.
To stop fast forward
•
press FR.
Fast rewind
•
Press FR (fast rewind).
At the beginning of the tape the unit
will start playback automatically.
To stop fast rewind
•
press FF.
Fast winding
FR : fast rewind - press FF to stop.
FF : fast forward - press FR to stop.
Reversing the tape
Press both buttons at a time.
"TR 1" or "TR 2" will appear in the display.
33
Advertisement
Table of Contents
