Aperture And Ventilation Requirements - Baumatic BMC460BGL Instruction Manual

Aperture and ventilation requirements

o The diagram
requirements that you require to build the appliance into a
housing unit.
o Ensure that the rear panel of the furniture housing unit has been
removed.
o This oven may be installed without any additional ventilation cut
outs being made in the housing unit. However the ventilation cut
shown in the diagram MUST be present, otherwise the
microwave oven may not function correctly. At the rear and
sides keep at least 45 mm free.
o Do not cover the ventilation slots or air intake points.
o The adjustable feet should not be removed.
o Do not position the microwave oven near a heat source. Please
note that transmitting and receiving equipment such as radios
and televisions can affect the operation of the microwave oven.
above shows the aperture and ventilation
32