Baby Lock Urity BLTY Instruction And Reference Manual page 300

CREATING BOBBIN WORK
d
Using the presser foot lever, raise the
embroidery foot.
e
To bring the bobbin thread above the
fabric, rotate the handwheel
counterclockwise while holding the upper
thread.
f
As shown below, pull the upper thread to
pull the bobbin thread up through the
fabric.
a Upper thread
b Bobbin thread
Memo
• If the bobbin thread cannot be pulled up,
use an awl to create small hole to help pull
bobbin thread to surface.
g
Press to unlock all keys and
buttons.
h
Lower the embroidery foot.
i
It is necessary to move to the beginning of
stitching so press
→ The embroidery frame moves to the beginning of
stitching.
E-94
, and then press .
j
While holding both the upper thread and
the bobbin thread, sew a section of the
pattern.
k
Stop the machine, and then tie the upper
thread and the bobbin thread together to
secure the threads.
l
Start embroidery again to finish the pattern.
m
Raise the needle and embroidery foot,
remove the embroidery frame, and then cut
the upper thread and the bobbin thread.
When cutting the threads, be sure to leave an
adequate length of thread so they can be
properly secured.