Thread Cutter Button; Needle Stop Position Button; Light Switch; Feed Dog Adjustment Knob - Baby Lock Jane BL500A Instruction And Reference Manual

Before You Begin (2)

Thread Cutter Button

Note
When the machine stops due to
jammed threads and so forth, do not
step on the foot controller, turn the
power off and move the needle with the
hand wheel, check the situation. Other-
wise broken needles could result.
G The thread cutter trims upper and
bobbin threads at the end of seams.

Needle Stop Position Button

G When indicator lamp is lit up, the
machine will stop sewing with the
needle lowered through the fabric.
G When indicator lamp is off, the
needle position when sewing
stops, will be random.
G If the safety mechanism is acti-
vated, for example if the thread
becomes tangled, the red lamp
flashes.

Light Switch

G Push light switch to turn the light
over the sewing area on and off.
Thread Cutter Button
✽ Press with the presser lever down.
Indicator Lamp
Needle Stop Position Button
Light Switch

Feed Dog Adjustment Knob

G Height of feed dogs can be ad-
justed to coincide with fabric
weights.
Foot Pressure and Feed Dog Position
(Feed Dogs Down)
(Pin Feeding)
Lightweight Fabrics
Middleweight Fabrics
Heavyweight Fabrics
Select one of four feed dog positions according to your needs.
Note
✽ If a setting other than
is selected, the pin feed mechanism will not operate.
✽ Coordinate the color coding for proper foot pressure and feed dog settings.
Feed Dog Adjustment Knob
Velvet
5