Oiling The Machine; Sewing Light - Baby Lock BL9 Instruction And Reference Manual

3
1
2

Oiling the Machine

Remove the cap, screw and face plate.
Apply a few drops of fine quality sewing machine oil to
the points indicated by the arrows in the
illustrations.
For a machine in constant use, oil two or three times a
year.
If the machine has stood idle for some time and does not
work smoothly, apply a few drops of
kerosene at the oiling points, and run the machine rap-
idly for one minute.
NOTE:
Before oiling, wipe off the oiling points.
Turn off the power switch when oiling the machine.
q Cap
w Screw
e Face plate

Sewing Light

The sewing light is located behind the face plate. To
change the bulb, take the face plate off the sewing
machine by removing the set screw.
• Unplug the power supply before changing the bulb.
• To remove, push up and turn the bulb to the left.
• To attach, push up and turn the bulb to the right.
WARNING:
The bulb could be HOT. Protect your fingers when
handle it.
44