Axis 223M User Manual page 43

AXIS 223M - System Options
43
Link-Local IPv4 Address
Link-Local Address is enabled by default and assigns the AXIS 223M with an additional IP
address for the UPnP protocol. The AXIS 223M can have both a Link-Local IP and a
static/DHCP IP address at the same time - these will not affect each other. See UPnP™, on
page 45.
HTTP
The default HTTP port number (80) can be changed to any port within the range
1024-65535. This is useful for simple port mapping.
HTTPS
The default HTTPS port number (443) can be changed to any port within the range
1024-65535. HTTPS is used to provide encrypted web browsing.
NAT Traversal (port mapping) for IPv4
Use NAT traversal when your AXIS 223M is located on an intranet (LAN) and you wish to
make it available from the other (WAN) side of a NAT router. With NAT traversal properly
configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded
to the network camera.
Enable/Disable - When enabled, the AXIS 223M will attempt to configure port mapping in
a NAT router on your network, using UPnP™.
Use manually selected NAT router - Select this option to manually select a NAT router.
Enter the IP address for the router in the field provided.
If a router is not manually specified, the AXIS 223M automatically searches for NAT
routers on your network. If more than one router is found, the default router is selected.
Alternative HTTP port - Select this option to manually define an external HTTP port. Enter
the port number in the field provided. If no port is entered here a port number is
automatically selected when NAT traversal is enabled.
FTP
The FTP server running in the AXIS 223M enables the upload of new firmware, user
applications, and so on. Check the box to enable the service.
RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the RTSP
port number to use. The default setting is 554.
Network Traffic
Connection type - The default setting is Connection type Auto-negotiate, that is the
correct speed is automatically selected. If necessary, the connection speed can be set by
selecting it from the drop-down list.