Axis 223M User Manual page 12

AXIS 223M - Accessing the Camera
12
The record button is used to record the current (MPEG-4) video stream. The
location where the image file is saved can be specified using the AMC control
panel. To enable recording, Select Live View Config > Viewer Settings >
Enable recording button.
Click the View Full Screen button to make the video image fill the entire
screen area. Press Esc (Escape) on the computer keyboard to exit full screen.
AMC Audio controls
There are audio controls for controlling the client computer's speaker output. These
controls are only available when audio is enabled, see The AXIS Media Control, on page
15 and Audio, on page 24.
Click the Speaker and Microphone buttons to switch the sound off and on for
the speaker and microphone, respectively.
When using Half-duplex mode, this button toggles between allowing you to
speak and listen. The first icon indicates that you can talk and the speaker
attached to the camera will play your voice. The second indicates that you
will hear audio from the camera, but no audio will be sent to any web clients.
When in simplex talk mode, the icon toggles between allowing you to speak and is
dimmed when you do not want other clients to receive any audio.
Use the sliders to control the volume on the speaker and microphone.
The volume can be set between 0 and 100.