Table of Contents
Advertisement
AXIS P5544 PTZ Dome Network Camera
Hardware Overview
•
Connecting to AXIS Internet Dynamic DNS Service. See page 42. To connect, press and hold the button for
about 3 seconds.
•
Resetting the product to factory default settings. See page 49.
Restart button - Press to restart the product.
Multi-connector - Terminal connector for connecting external equipment:
•
Audio equipment
•
Input/Output (I/O) devices
•
AC/DC power supply
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product's IP
rating, see Multi-Connector Cable (sold separately), on page 50.
LED Indicators
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during firmware upgrade.
Amber/red
Flashes amber/red if network connection is unavailable or lost.
Red
Flashes red for firmware upgrade failure.
Green
Shows steady green for 10 seconds for normal operation after restart.
Midspan LED Indicators
LED
Port
AC input
Color
Unlit
Green
Green, flashing
Green, flashing
Green
Indication
No camera connected.
Steady when camera connected, normal operation.
Slow flash when over current or short circuit condition on the port.
Fast flash when input voltage is out of range or other internal error.
Steady when AC power connected.
6
Advertisement
Table of Contents
