Axis 206 User Manual page 29

Installation of additional ActiveX
component restricted or prohibited
Video/Image problems, general
Image too dark or too light
Slow image update
Low frame rate and/or noisy images. If there is insufficient lighting available, adjust the Low Light Behavior settings under the
Slow performance
Image gradually gets darker or lighter When using the AXIS 206 in locations lit by fluorescent lighting, check in the advanced
Poor quality snapshot images
Screen incorrectly configured on your
workstation
Browser freezes
Netscape 7.x or Mozilla 1.4 (or later)
can sometimes freeze on a slow com-
puter
Problems uploading files
Limited space
For additional assistance, please contact your reseller or see the support pages on the Axis
Website at www.axis.com/techsup
Configure your camera to use a Java applet for updating the video images under
Live View Config > Layout > Default Viewer for Internet Explorer. See the online help for
more information.
Check the video image settings. See the online help on Video and Image Settings.
Configuring, e.g. pre-buffers, motion detection, high-resolution images, high frame rates,
etc, will reduce the performance of the camera.
Advanced Image settings. See the online help for more information.
Slow performance may be caused by heavy network traffic, too many users accessing the
unit, low performance clients, image rotation.
image settings that the Exposer control is set to Flicker-free.
In Display Properties, configure your screen to show at least 65000 colors, i.e. at least
16-bit. Using only 16 or 256 colors will produce dithering artifacts in the image.
Lower the image resolution.
There is only limited space available for the upload of your own files. Try deleting existing
files to free up space.
AXIS 206 - Troubleshooting
29