Configuring Your C|3 Software; Activating Your C|3 Software; Using Your Phone To Control Your Vehicle; Launching C|3 - Autopage Telematics and Tracking Module Operation Manual

2.1

Configuring Your C|3 Software

When C|3 is downloaded and installed on your phone, it comes in a 'Not
Activated' state, that is to say that it is not connected to any vehicles.
Follow the instructions on the website to Activate your C|3 software to
your vehicle. Log on to your account at
your activation code. The configuration established by your professional
installer during the installation of the vehicle hardware will be transferred
to your phone during activation. You can always add additional features
to your C|3 system. Ask your professional installer about additional
modules to control other vehicle systems that are C|3 compatible. Any
changes after the initial setup can be transferred to your phone by
selecting the "Update C|3" option from the options menu within the C|3
application on your phone.
2.2

Activating Your C|3 Software

C|3 is designed to allow your phone (and other phones on your account)
to securely access your vehicle system. This is accomplished by
assigning a unique passkey to your phone such that the Moshi™
network can properly verify that your phone is authorized to control your
vehicle system. This unique passkey is assigned to your phone when
you activate the C|3 software you have downloaded. The activation
process automatically assigns your unique passkey; you only need to
follow the instructions in your account on the C|3 web portal and on your
phone to complete this process. This step only needs to be completed
one time for each phone on which you load the C|3 software. If your
phone gets reset or you need to reinstall the C|3 software, you will need
to activate your software again. Please go to
log into your account to add phones or reinstall the C|3 software.
3.0

Using Your Phone to Control Your Vehicle

www.c3.gomoshi.com to retrieve
www.c3.gomoshi.com and