Advertisement
Rabbeting Bits with Bearing Set
Application: Joining boards and letting in back panels with
different depths of cut
• With interchangeable bearings to cut rabbets of different depths, these sets produce
super smooth cuts on both surfaces of the rabbet.
• 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits.
• Wrench included.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
A
• Use on hand-held and table-mounted portable routers.
Number
32-502
32-504
32-522
32-524
32-526
D
1/2"
# 32-502
# 32-504
# 32-522
# 32-524
Red Item Numbers Indicate 1/2 " Shank
Item
Overall
Dia.(D)
1-3/8"
5/16",3/8",7/16",1/2"
1-3/8"
flush, 1/8",1/4",5/16",3/8",7/16",1/2"
1-3/8"
5/16", 3/8", 7/16", 1/2"
1-3/8"
flush, 1/8",1/4",5/16",3/8",7/16",1/2"
1-3/8"
flush, 1/8",1/4",5/16",3/8",7/16",1/2"
1/8"
# 32-504
# 32-526
# 32-524
5/16"
5/16"
# 32-526
# 32-502
# 32-504
# 32-522
# 32-524
3/8"
# 32-526
Both Sets Include the Wrench and Step Washers
3/8" Bearing #62-102
Set of
1/2" Bearing #62-104
4
5/8" Bearing #62-113
Set of
3/4" Bearing #62-144
7
7/8" Bearing #62-146
1-1/8" Bearing #62-148
1-3/8" Bearing #62-150
All Profile Drawings 1:1 Scale
Rabbeting
Carbide
Depths
Height(h)
1/2"
1/2"
1/2"
1/2"
3/4"
1/4"
1/8"
# 32-504
# 32-524
3/8"
# 32-502
# 32-504
# 32-522
# 32-524
7/16"
# 32-526
or
Shank
Overall
Dia.(A) Lenght(H)
1/4"
2-1/4"
1/4"
2-1/4"
1/2"
2-1/4"
1/2"
2-1/4"
1/2"
2-1/2"
1/4"
# 32-526
7/16"
# 32-502
# 32-504
# 32-522
# 32-524
1/2"
# 32-526
•
Wrench
#62-402
•
1/2" STEP WASHER
#62-313
•
3/8" STEP WASHER
#62-311
3/8"
Supplied 3/8" STEP
WASHER to use when
mounting 3/8" ball
bearing only.
159
Advertisement
