Page 1
Dovetail Bits Application: Strong, attractive joints for drawers and boxes • Compatible with popular dovetail jigs, these bits produce smooth, intricate dovetail joints. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
Page 3
3/8" # 32-096 # 32-098 # 32-302 # 32-306 Butterfly Spline Bit Application: Sturdy, decorative design for exposed joints • This bit produces a strong, attractive method of joining wood. Use a 14-degree dovetail bit to produce the mating grooves. •...
Page 4
Rabbeting Bits with Bearing Set Application: Joining boards and letting in back panels with different depths of cut • With interchangeable bearings to cut rabbets of different depths, these sets produce super smooth cuts on both surfaces of the rabbet. •...
Page 5
Stacked Slotting Set Application: Producing grooves 1/8" to 23/32" wide • By changing the bearings this set will cut three different depths (1/4", 3/8", 1/2"). • Set includes Freud's slotting cutter arbor 60-202, 3 bearings and 4 specially designed slotting cutters. •...
Page 6
Biscuit Joining Set Application: Creating perfect slots for biscuit joining • Easy and economical way to join wood. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on hand-held and table-mounted portable routers. Item Number 99-041 Replacement Cutter 52-154 Bearings Bearing No.
Page 7
® ® Three Wing Slotting Cutters Application: Producing slots and grooves for T-moldings, spline joints, tongue & groove joints and many other applications • Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and 60-102 for 1/2" shanks. •...
Page 8
Slotting Cutter Arbors Application: Producing smooth, precise, accurate slots • For premium performance use with Freud slotting cutters, although compatible with any slotting cutter with a 5/16" bore. • Use on hand-held and table-mounted portable routers. Item Number 60-100 60-102 60-120* 60-122* 60-152...
Page 9
22mm 9/16" # 63-106 # 63-156 9/16" # 63-110 # 63-160 Slotting Cutter Sets Application: Producing slots and grooves 9/16" deep for T-moldings, Spline Joints, Tongue & Groove Joints, and other applications • Includes three wing slotting cutter, arbor and ball bearing. •...
Page 10
Canoe Joint Bits Application: Producing joints for projects such as circular planters and canoes • Bit 99-017 cuts the flute and 99-018 cuts the mating bead. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on CNC and other automatic routers as well as table-mounted portable routers. Item Number 99-017...
Page 11
#99-240 15/32" for #99-239 Drawing not to scale Drawer lock bits should be positioned above the router table as shown above for optimal performance. Drawer Lock Bits Application: Forming a strong joint between the sides and front of a drawer •...
Page 12
Lock Miter Bits Application: Creating interlocking corner joints • Run one board vertically and the piece to be joined horizontally. • 99-035 cuts thinner panels for projects such as humidors and jewelry boxes. • Cuts all composition materials, plywoods, hardwoods, and softwoods. •...
Page 13
5/32" Raised Panel “V” Joint Bit Application: Producing strong, attractive glue joint raised panels • Mating surfaces are at an angle, not vertical, so the dark lines like those created by standard finger joint bits arenot visible. • Bit does not have to be centered in the wood. •...
Page 14
Adjustable Tongue & Groove Bit Set Application: Producing perfectly fitted tongue and groove joints for projects such as Shaker style cabinet doors • Exclusive Freud design features a tongue cutter with opposing shear angles to ensure a flawless finish. • Adjustable at .002 inch increments for stock thickness of 1/2" to 1-1/4" and groove widths of 7/32"...
Page 15
5/32" Raised Panel “V” Joint Bit Application: Producing strong, attractive glue joint raised panels • Mating surfaces are at an angle, not vertical, so the dark lines like those created by standard finger joint bits arenot visible. • Bit does not have to be centered in the wood. •...
Page 16
• Tips on each side of the bit are offset, cutting twice as many fingers as you see tips on each side of the bit. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on CNC and other automatic routers as well as table-mounted portable router. Item Number 99-037 Red Item Numbers Indicate 1/2 "...
Page 17
# 52-108 Variable Height Finger Joint Bit Application: Adjustable to produce finger joints up to 1-25/32" thick • Ideal for joining wood edge-to-edge or end-to-end, because the joint produced is stronger than the wood itself. • Replacement cutters available and uses arbor #60-152. •...
Page 18
“V” Panel Bit Set Application: Creating attractive “V” Groove paneling • Set includes spacers that allow you to produce “V” paneling from 1/2", 3/4", or 1" thick stock. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on table-mounted portable routers. Item Overall Number...