Related Manuals for August DA104PF
Summary of Contents for August DA104PF
- Page 1 ® User Manual 10.4 Inch Digital & Analogue LCD TV August International Ltd With built-in card reader and USB port United Kingdom Telephone:0870 850 3525 DA104PF www.augustint.com...
- Page 2 Thank you for buying our August TV. You may already be familiar with using 2. When turning on the device for the first time, it will ask you to do the a similar product but please take time to read these instructions carefully.
-
Page 3: Table Of Contents
Switchover Program. Reception may also be affected by various factors such as how close you are to transmitters, tall buildings, thick walls, 12.Technical Parameters ceilings and weather etc. 13.Warranty 7. For any further queries, please telephone August International Ltd helpline 0870 850 3525 or email service@augustint.com... -
Page 4: Safety Instructions
1. Safety Instructions 1.Only use the attached AC adapter or car adapter. Storage and Use 2.For the sake of safety, when you do not intend to use the display, please The storage Keep the TV set switch off the AC adapter or car adapter. temperature of this away from water machine is -20 to... -
Page 5: Accessories
3. Accessories 4. Part Names and Functions 1 TFT LCD screen 2 Remote receiver 3 NEXT Channel 4 PRE Channel 5 Menu 6 Volume+ / Right Remote control 7 Volume - / Left 8 PLAY PAUSE 9 Mode 10 AV IN jack 11 AV OUT jack 12 SD MS MMC port 13 USB port... - Page 6 22.REPEAT and card functions. 23.MENU In DPF mode, press and hold Mode to change to DVB-T mode for 24.DISPLAY watching digital Freeview TV. 25.L/R 26.FAV/ZOOM 110 DPF DVB TV 27.NEXT 28.PREV 29.TTX (not available) 30.STEP DA104PF 31.VOLUME+ 32.VOLUME- 33.PRLIST 34.RETURN...
-
Page 7: Connections
Remote Control Functions This table explains the functions of the buttons on the remote control in each mode: 6. Connections Mode 6.1. Installing the base support Remote Button DVB -T USB & card Unscrew the oval handle on the POWER Power On/Off ball-joint, it will split into halves, DPF/DVB... -
Page 8: System Connection
7. Digital Freeview TV (DVB-T) 6.6. System Connection 7.1. Turn on the machine Press POWER to turn on the machine. 1. Always turn off the power of all devices before you connect or disconnect It will enter the mode that it was when any cables. - Page 9 here, the channel can be changed 7.3.1.4 Channel Edit 7.3.2.6. Time Settings using the UP or DOWN keys, press Enter the Channel Edit menu. To TIME ZONE: If you fixed the country ENTER to start viewing in full change a channel's name, select a whilst searching for channels, you channel and press ENTER.
-
Page 10: Dpf Mode (Usb & Card Reader)
9. Analogue TV Frequency, End Frequency and 8. DPF Mode Press TV on the remote control to switch to the Analogue TV mode. Bandwidth. If the Scan Type is single (USB and Card Reader Functions) Press MENU, use to select and adjust. channel, only the Country and Start BRIGHT Channel can be set. -
Page 11: Av Input
12. Technical Parameters 10. AV Input Press MENU on the remote control. 10.4 inch digital and analogue LCD TV Product Name: to select and adjust. with built-in card reader and USB port MPEG4: 4 and 5 versions without QPEL and GMC AC/DC adapter: AC 100/240V-50/60 Hz-DC adaptor +12V(car cigarette lighter) Press MENU... -
Page 12: Warranty
This is due to the fact that Freeview is yet to operate in full power in the UK. August TVs should not be deemed as faulty if it can receive Freeview by connecting to a proper digital rooftop aerial.