Firmware Upgrade; Configuration Tools - Planet PRT-301W User Manual

Password Settings
Current Password
Password
Re-type password
Idle Time Out
Remote Management
Enable
IP Address
Port

4.1.3 Firmware Upgrade

You can upgrade the PRT-301W with new firmware in this page.
1. Download the latest firmware from PLANET web site, and save it to your local disk.
Click "Browse..." and find out the location of the downloaded file.
2.
Select the file and click "APPLY" to start the firmware upgrade.
3.

4.1.4 Configuration Tools

Reset to Factory
Default Configuration
Enter the password value currently used here. There is no pass-
word by default. It is recommended to change the default setting for
better protection.
Enter the new password value in this field.
Enter the new password again for confirmation.
Specify the time that will elapse before the PRT-301W times out of
a connection.
Select to enable Remote Management option.
Type the IP address of the PC that can be used for remote man-
agement.
Specify the remote management port number.
Use this option to restore your PRT-301W with factory default
settings.
11