Planet ICF-1501 User Manual page 40

PPPoE
(PPPoE user name and PPPoE password under "Network" menu must be set.)
1. Use the [▼] key to go to Update IP Address and input your Update IP address.
2. Press [ESC] to save the setting and start upgrading the software.
(It will take about fifteen seconds to start upgrading. Please wait patiently.)
After network setting, press the [Speaker] key to save the settings and start updating.
After updating, system will restart automatically. (Please wait for about fifteen
seconds.)
If there is no upgrade file to update, the screen will return to Remote Update page.
Press [Menu] and then press [ENTER]. The system will restart automatically and
return to standby mode. (Please wait for about ten seconds.)
Note:
The system only accepts the redaction software higher than original.
40