Front View; About Region Codes; Busy Indicator - Pioneer DVR-X162Q Operating Instructions Manual

Dvd / cd writer

Hide thumbs Also See for DVR-X162Q:

Table of Contents

Available languages

INTERFACE

FRONT VIEW

① Forced Ejection Hole

If the tray fails to eject when the Eject button is pressed, insert a stiff rod into the hole

and push to eject the tray.

During normal operation, the eject button should be used to unload the tray. Turn the

power to the drive OFF then wait approximately one minute until the disc stops spinning

before trying to eject the tray redundant prepositional phrase.

Operation status is indicated as follows:

During reading

During writing

③ Eject Button

Press the button to unload / load the disc.

④ Disc Tray

Press the Eject button to open the loading tray then place a CD or DVD disc onto the

tray with the label facing up. Press the Eject button again or gently push the tray to

close and load.

Do not attempt to forcibly pull out the disc tray – use the Forced Ejection Hole ①.

The region code can only be changed five (5) times, including the initial setting. Please be

aware that the fifth change becomes PERMANENT. Therefore, avoid changing the region

code unless absolutely necessary.

Region codes are part of the DVD Standard. However, region codes on DVD discs

are optional. DVD discs with no specified region code can be played on all

compliant players.

Lights

Table of Contents